CCT Chamber Accessories
Additonal & Alternative Chamber Fittings
All Ascott test chambers are supplied complete and ready to run. The following optional accessories may not therefore be necessary, but some may be considered desirable. Use the menu above to select other chamber accessory sections.
F = factory fitted only A = available separately
|
Optional accessory |
Reference |
Description |
F/A |
|
Entry ports  |
ACC10† |
Sealable chamber entry port through the chamber’s left hand wall to enable the connection of external monitoring/driving equipment. † Specify as: |
F |
|
| |||
|
Mesh type racking  |
ACC15/**** |
Mesh type racking for testing small components. Locates on the high level shelf supports provided as standard inside the chamber, and removable if required. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Slotted type sample racks  |
ACC16/**** |
Removable slotted type sample rack for testing panels/coupons. Each slot is 3mm/1/8” wide and angled at 15 degrees from vertical. Such racks are supplied as standard, unless otherwise specified. Wider slots and/or different angles are available on request. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Rod type sample racks  |
ACC17/**** |
Removable rod type sample rack for suspending small test samples hung beneath, or for supporting larger test samples placed on top of these racks. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Spiked type sample racks  |
ACC18/**** |
Removable spiked type sample rack for suspending test samples from the 10mm/0.4" diameter x 55mm/2" long spikes, equally spaced, and protruding from opposite sides. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Reinforced false floor  |
ACC19/**** |
Removable reinforced false floor, providing a horizontal platform over the chamber base for supporting large/heavy test samples. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Interior illumination  |
ACC26/**** |
Illuminates the chamber interior when a control panel push-button is pressed. **** Specify chamber size in Ltrs. |
F |
|
| |||
|
Canopy color change
|
ACC60† |
As standard, and unless otherwise specified, chambers will be fitted with a blue canopy (RAL 5005). By specifying this 'no cost' option, the canopy color can be changed to: † specify color required. Colors are a representation only |
F |
|
| |||
|
Manual filling air saturator  |
ACC66 |
Enables air saturator to be manually filled and periodically topped up with water by hand as an alternative to the automatic fill and top up provided as standard. Adds 75mm/3” to external chamber width. |
F |
|
| |||
|
Window insulated cover  |
ACC82/**** |
Comprises of an insulated cover, which is specially shaped to match the window aperture. This will reduce the amount of condensation that can form on the inside of the window during testing and will also improve thermal efficiency. **** Specify chamber size in Ltrs. |
A |
|
| |||
|
Racks for radiators  |
ACC84 |
Support racking for different sizes of vehicle radiator. Attachment points allow radiator to be positioned at various angles. Several radiators may be accommodated if the inclination angle is shallow. 1000 Ltr chambers can accommodate 1x ACC84; 2000 Ltr chambers can accommodate up to 2x ACC84 (not suitable for 120 or 450 Ltr chambers). |
A |
|
| |||
|
Racks for brake disks  |
ACC88 |
Specifically designed to support vehicle brake disks at an angle of 15 degrees from vertical. Each rack can support up to two disks. The rack locates over two adjacent sample racks as supplied with each new Ascott chamber. |
A |
|
| |||
|
Compressed air coupling |
ACC94 |
A control panel mounted, quick release coupling to facilitate the connection of a third-party air pressure gauge (not supplied) for checking/calibrating the chamber’s own air pressure gauge. |
F |
|
| |||
|
Atomizer airflow optimizer |
ACC106 |
An airflow anemometer with adaptor, to enable the chamber atomizer airflow to be checked and optimized. |
A |
|
| |||
|
Vertically operating canopy |
ACC110/**** **** Specify chamber size in Ltrs. |
Special design of canopy to allow it to open to a vertical position to enable access from above (e.g. by hoist) for large and/or heavy test samples. |
A |
